Thank you very much for entering our site. Every file on our site is very well tested. We first use the file if we see everything in okay after then we upload the file to our site. If you see any of our files are not working in your mobile phone, then call us at the call center and tell us about your problem.
Hang Logo & Dead Recovery
Model Brand : OALE
Model Name : XS2 LTE
Device CPU: Mediatek (MT6761)
File Size :1.20GB
Rom Version : Android 9.0Pie
Room Type : Read File
File Status : Paid. If any problem in software, then you will get your money Back
Dead Boot Recover File
Hang Logo Fix File
Google account Remove/Frp Reset File
No Dead Risk
100% Tested Firmware Flash File
Tested by gsm kawsar
What is firmware or flash file ? Firmware or Flash file is a OS that your device runs. Yes, It is like our PC’s Windows OS. It is a software and without it Your device is dead. Remember it, Your device is BODY but Firmware is LIFE. Flashing new firmware helps your device in every possible ways. It will make your device like new bought phone. So,if you are having trouble with your phone and want to solution. Then Flash a firmware that matches with your device model.
Virus Status: Manual Scanned by Kaspersky antivirus
Firmware type: Application/x-zip-compressed
Firmware extension: Rar
Firmware Paid Password Protected
OALE XS2 LTE 100% working and tested firmware available here to download. This file Fixed White LCD,Camera Not Work, Unfortunately Stopped Apps , Device Hang on Logo, Hard Brick, Recovery Mode, unwanted popup ads issue and other hanging problem . Each of our files is tested and then shared.There is no better website than to download 100% good file. If the files are useful to you you can bookmark this website to your browser. Download OALE XS2 LTE Flash file from the link below with 100% download speed from google drive.Flash OALE XS2 LTE with SP Flash Tool .
How to flash yourOALE XS2 LTE device using SP flash tool.
✅Step 1: Download the firmware to your computer.
✅Step 2: Extract the file on your computer’s drive
✅Step 3: Download the correct USB driver
✅Step 4: Extract the file
✅Step 5: Install the USB Driver.
✅Step 6: Download SP Flash Tool
✅Step 7: Run sp flash tool.
✅Step 8: Load scatter files from extracted firmware folder
✅Step 9: Connect your Device using USB Cable.
✅Step 10:Now Click the Download / upgrade firmware of SP flash tool to start flashing.
✅Step 11:And wait for the process to finish and please do not unplug your device before finishing the process.
✅Step 12:A green ring display for flash successes will appear at the top